People
305 document(s) found.
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31]

T.Fabian, ""Vergleich und Optimierung der Ansteuerverfahren eines kapazitiven Winkel- und Winkelgeschwindigkeitssensors"; Master Thesis, Vienna University of Technology, 1998".
I. Kroo, F. Prinz, "The Mesicopter: A Meso-Scale Flight Vehicle NIAC Phase II Technical Proposal".
I.Kroo, F.Prinz, R. Leitgeb, Y.L. Cheng, "The Mesicopter: A Meso-Scale Flight Vehicle, NIAC Phase I Final Report, 1999".
I.Kroo, F.Prinz, B.Murphy, ""Mesicopter: A Meso-Scale Flight Vehicle for Atmospheric Sensing", Phase1 Proposal, 1998".
H. Schilp, ""Fabrication of Turbine-Compressor-Shaft Assembly for Micro Gas Turbine Engine", Master thesis, December 2000".
B.H. Park and F. B. Prinz, "Mesoscopic Assemblies with SDM Processing, Proceedings of the Solid Freeform Fabrication Symposium, University of Texas at Austin, Austin, Texas, August 2000.".
T. Golnas and F.B. Prinz, "Thin film thermo-mechanical sensors embedded in metallic structures Proceedings of the 6th International Symposium on Trends and Applications of Thin Films, Regensburg, Germany, March 1998.".
J.H. Kao, F.B. Prinz, "Optimal motion planning for deposition in layered manufacturing Proceedings of DETC'98, 1998 ASME Design Engineering Technical Conference, Atlanta, Georgia".
G.R. Link, J.Fessler, A.Nickel, F.Prinz, "Rapid Tooling die case inserts using Shape Deposition Manufacturing, Materials and Manufacturing Processes, 13(2) 263-274, 1998".
Tan, S., J. M. Pinilla, et al., "TRADEWIND: A Prototype Internet Marketplace for Solid Free-form Fabrication ASME DETC/CIE Conference, Atlanta, GA, 1998.".
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31]